Grandstream Networks GRP260X Series Administration Manual page 28

Line-Seize Timeout
Call Park
Call Park Feature Code
Call Park Retrieve Feature Code
Account x �� Dial Plan
Name
Rule
Type
Hidden Number Feature
Hidden Number Plan List
Hidden Number Plan Test
Hidden Number Plan
Enable Local Call Features
DND
DND Call Feature On
Configures the interval (in seconds) when the line-seize is considered timed out when Shared
Call Appearance feature is used. Valid range is 15 to 60.
Configure the feature access code for parking current call to parking lot or another extension.
Configure the feature access code for retrieving the parked call on accounts or BLF keys.
Enter the name for the configured rules.
Enter the rule settings (number pattern, prefix to add ...etc.).
Choose the type of the rule:
● Pattern: The phone will dial the number matching the entered pattern.
● Block: The phone will block the number/pattern matching the rule.
● Dial now: The phone will dial immediately the number once the DTMF matches the dial
plan.
● Prefix: Specify the "Replaced" field to replace by the "Used" field to dial.
● Second tone: The phone plays the second dial tone when the entered "Trigger" digit is
dialed.
Account x �� Hidden Number Plan
If set to "Yes", incoming and outgoing number display will be handled according to hidden
number plan.
Currently, incoming and outgoing number display will be handled according to hidden number
plan. Users are able to configure the hidden number rules, matching their syntax rules from
top to bottom as follows:
1. Expression element(element)element (element)element element(element) (element)
2. Element Rules • x：any digit number from 0-9 • +：any length after x(>=1) • [-+...] or
*：Escape symbol • ()：The part that needs to be hidden, there can only be one hidden
part in a rule
3. Examples x+(xxxx)xxxx: 13705806547 -> 137****6547 xxx(x+)xxxx: 07113705806547
-> 071*******6547 071-x+(xxxx)xxxx: 071-13705806547 -> 071-137****6547
Enter the number to test the hidden rules of the current page. After confirming, please save and
apply it.
When enabled, Do Not Disturb, Call Forwarding and other call features can be used via the
local feature codes on the phone. Otherwise, the provisioned feature codes from the server will
be used. User configured feature codes will be used only if server provisioned feature codes
are not provided.
Note: If the device is registered with Broadsoft account, it does not matter if local call features
are enabled or disabled, once the Broadsoft account is set, special feature to Broadsoft and
Feature Key Synchronization is enabled, the call feature will be handled by Broadsoft server,
not by the phone.
Configures DND feature code to turn on DND.