Table of Contents
Advertisement
10 Extra codes and accessories
A
96
The setup program is installed by means of an installation program for Micro-
soft Windows.
The operation of the setup program is described in the Installation Manual
(B 70.6030.3) and in Windows Online Help.
All the parameters of the printing recorder can be programmed with the aid of
the setup program.
A summary of all the parameters of the recorder is provided in the Appendix.
Section 12.5 "Summary of the parameters"
If the setup connector is plugged into the recorder, then
- the signal acquisition and
- the recording
are interrupted.
Additionally,
- events are no longer registered,
- reports are aborted and reset,
- limits are no longer monitored and
- the outputs are no longer operated.
The relays are de-energised.
Advertisement
Table of Contents
