Table of Contents
Advertisement
4.2.4
Configuration level 2 (C2-level)
Unit name
Open-collector
output
Speed in limit
operation
(feed limit)
Timed operation
(feed time)
Print speed change Configuration level 2
Print the
"Power on" text
Print the
"Power off" text
Print the
scaling
Parameter
Configuration level 2
Unit name
Text:
Configuration level 2
Open-collector output
X Output
Status:
Configuration level 2
Feed limit
Feed limit:
Configuration level 2
Feed time
Feed time:
from - to:
from - to:
Print speed change
Status:
Configuration level 2
Print the "power on" text
Status:
Text:
Configuration level 2
Print the "power off" text
Status:
Text:
Configuration level 2
Print scale
Spacing:
4 Configuration table
Value/selection
16 characters
1 — 4
OFF, ON
0, 5, 10, 20, 60, 120, 240,
300, 360, 600, 720mm/h
0, 5, 10, 20, 60, 120, 240,
300, 360, 600, 720mm/h
Enter any time for "from"
Enter any time for "to"
OFF, ON
OFF, ON
16 characters
OFF, ON
16 characters
OFF, 30, 60, 90cm
Description
Enter instrument
designation
Select open-collector
output
Enter status
Select speed
The recorder switches to
this chart speed, if the
limits configured in the
parameter Configuration
level 1
Limit feed are
infringed
Select speed
This chart speed only
applies during the defined
period of time
Enter start time
Enter end time
Select the status for print-
out of an alteration or
change-over of the chart
speed
Status for print-out of the
"power on" text (if OFF:
text entry not required)
Enter "power on" text
Status for the print-out of
the "power off" text (if OFF:
text entry is not required)
Enter "power off" text
Determine the regular in-
terval at which the scaling
should be printed in the
chart
63
Advertisement
Table of Contents
