Table of Contents
Advertisement
3 Operation and visualisation
3.5.14 Service print
H
H
H
50
The service print can only be initiated from the keys on the printing recorder
(Operating level
Service print).
The print-out consists of:
- the current date and time
- the software version
- the number of mains power supply interruptions
- the total operational time of the recorder in hours
- the current state of the two event counters
- the minimum and maximum ambient temperatures of the internal Pt100
cold junction
13.45 03.11.98 SERVICE PRINT
Software version
Power interrupts
Operating time [h]
Event counter 1
Event counter 2
Temp.-Min.
Temp.-Max.
Any text print-outs which were started will be aborted and not
continued after the service print. This also applies to the statistical
report.
All requests for text printing which occur during the service print
will be stored and carried out after the service print.
If the mathematics/logic module is activated, an "M" will be printed
after the software version.
: 105.02.01
: 00012
: 01234
: 00000
: 09000
: +20.32
: +31.02
Advertisement
Table of Contents
