JUMO LOGOPRINT 500 Operating Manual page 59

Parameter
End res. Re:
Filter:
Configuration level 1
Measurement input
Type: voltage
Characteristic:
Unit:
Range start:
Range end:
Temperature:
(dimension)
Temp. start:
Temp. end:
Filter:
Configuration level 1
Measurement input
Type: current / shunt
Characteristic:
Range start:
1. The limits for range start (temp. start) and range end (temp. end) differ
according to the characteristic
4 Configuration table
Value/selection
0 ≤ Re ≤ 4000Ω
Ra + Rs + Re ≤ 4000Ω
Meas. span ≥ 6Ω
0.0 — 50.0sec
linear, Pt100, Pt100 JIS,
Pt500, Pt1000, Ni100, L, J,
U, T, K, E, N, S, R, B, X1,
X2
mV, V
-9999 to +9999
-10V ≤ range start < 10V
-9999 to +9999
-10V < range end ≤ 10V
Meas. span ≥ 5mV
°C, °F
-9999 to +9999
-9999 to +9999
Measurement span
- Resistance
thermometer ≥ 15°C
- Thermocouples
≥ 100°C
- S, R, B ≥ 500°C
0.0 — 50.0sec
linear, Pt 100, Pt 100 JIS,
Pt 500, Pt 1000, Ni 100, L,
J, U, T, K, E, N, S, R, B, X1,
X2
-9999 to +9999
-20mA ≤ rge. start < 20mA
Description
Enter end resistance
Enter filter constant
X1 = customer-specific
linearisation 1
X2 = customer-specific
linearisation 2
(with X1 or X2 : followed
immediately by the entry
for the filter parameter)
Enter start of
1
measurement range
Enter end of
1
measurement range
(only for thermocouples
and resistance
thermometers)
Enter start of temperature
1
range
(only for thermocouples
and resistance
thermometers)
Enter end of temperature
1
range
(only for thermocouples
and resistance
thermometers)
Enter filter constant
X1 = customer-specific
linearisation 1
X2 = customer-specific
linearisation 2
(with X1 or X2 : followed
immediately by the entry
for the filter parameter)
Enter start of measurement
1
range
59