Instrument Description; Display And Controls - JUMO LOGOPRINT 500 Operating Manual

2.1 Display and controls

Fault signal LED
This lights up as soon as the recording is interrupted by the "end
of chart paper", "stop" through pressing stop key S , or by an
external stop.
24-character green LED
dot-matrix display
Print head
Chart paper
Measurement channel label
Here you can enter the channel designation and/or the
corresponding measurement range
Panel-mounting housing to IEC 61554 in galvanised steel sheet

2 Instrument description

(behind the swing-up
Keys for
operating und programming
Setup interface
LED dot-matrix)
Housing door
to open or close
11