Table of Contents
Advertisement
3 Operation and visualisation
32
Time
Text-print request
12:07
12:06
12:05
12:04
12:03
12:02
Limit exceeded
12:01
12:00
Report
If texts with the same priority cannot be printed at once, then the order in
which they will be printed is not determined by the order in which the corre-
sponding events occurred, but is determined by an internal order of prece-
dence in the recorder.
- Start text
- Text on change of chart speed
- Report
- External text
- Binary-linked external text
- Limit comparator texts
- Print event counter
- Customized texts
- External scaling
- Print time
- Cyclic scaling
- Channel numbers
Example:
Although the priorities have been configured to be the same, the time will be
printed before the cyclic scaling.
If the recorder is put into the stop status, or switched off, then all the printing
requests which were already present or which occur during this period will be
cancelled. The print-out of the texts will not be dealt with when the recording
starts again. Exception: A request for the print-out of a report which occurs
during a stop status will not be cancelled. The report will be printed after the
stop is ended. But if a report which was being printed is interrupted by a stop
it will not be continued after the recording has been restarted.
the actual text printed is:
12:02 Limit exceeded
Report
Advertisement
Table of Contents
