Table of Contents
Advertisement
4 Configuration table
4.2.5
Configuration level 3 (C3-level)
Relay output
Mathematical
module
Interface
External text
Binary-linked
external text
(text logic links)
66
Parameter
Configuration level 3
Relay output
X Relay
Status:
Configuration level 3
Mathematical module
Mathematical m.:
Configuration level 3
Interface
Protocol:
Baud:
Data format:
Address:
Min. response time:
Configuration level 3
External text
X External text
Contact:
Text:
Configuration level 3
Text logic links
Link:
Value/selection
1 — 8
OFF, ON
OFF, ON
J-BUS, MOD-BUS
0.15, 0.3, 1.2, 2.4, 4.8, 9.6,
19.2, 38.4, 125,
187.5kBaud
8/1/NO,
8/1/ODD,
8/1/EVEN,
8/2/NO,
8/1/ZERO
1 — 255
0 — 500msec.
1 — 8
OFF, Log. input 1,
Log. input 2, Log. input. 3,
Log. input 4, Log. input 5,
Log. input 6, Log. input 7,
Log. input 8
16 characters
OFF, Log. input 1,
Log. input 1-2,
Log. input 1-3,
Log. input 1-4
Description
Select relay
OFF = relay inactive
ON = relay operates as an
LK output
Activate/de-activate
mathematics module
Set up RS422/RS485
Select protocol
Select baud rate
Select data format
(Data bits / stop bits /
parity)
Select address
Select minimum response
time
Select the number of the
external text
Select logic input.
(if OFF: the text entry is not
required)
Enter text
Select the inputs which are
to be binary-linked, (if OFF,
all further sub-parameters
are not required)
Advertisement
Table of Contents
