Table of Contents
Advertisement
Configuration
level 2 (C2-level)
H
H
Configuration level 2 can be accessed from configuration level 1 with the aid
of the h + R keys, or from configuration level 3 by using e.
If a correct code number is entered when calling up the parameter
level, then the signal acquisition and recording will be interrupted
in this level. The parameters can be viewed and altered.
The relays of the external relay module ER8 remain in the present
state. They will only be switchable again when the printing record-
er has been returned to the operating level or the basic status.
Configuration level 2 includes the following global parameters:
- unit name
- open-collector output
- chart speed in limit operation
- timed operation (feed time)
- print-out of speed change
- print-out of the "power on" text
- print-out of the "power off" text
- scaling print
- time print
- print channel number
- report
- start text
- end text
- presetting
- code number
2 Instrument description
21
Advertisement
Table of Contents
