Table of Contents
Advertisement
12 Appendix
12.3 Status messages
104
The following status messages are indicated in the LED dot-matrix display:
Display
INITIALISATION
STOP
EXTERNAL STOP
SETUP
PLEASE WAIT!
Description
- The printing recorder is being initialised.
- The recorder is in the stop status, because
the S key has been pressed.
- The recorder is in the stop status, because
the "external stop" has been activated by
closing the corresponding logic input.
- The setup connector has been inserted
into the recorder.
- The instrument is ready for communication
with the PC connected to it.
- The configuration data are being written to
the EEPROM. The recorder will not
respond to any inputs during this time.
Advertisement
Table of Contents
