Typographical Conventions; Warning Signs; Note Signs - JUMO LOGOPRINT 500 Operating Manual

1.3

Typographical conventions

1.3.1

Warning signs

V
A
E
1.3.2

Note signs

H
v
1
abc
h
The signs for Danger and Warning are used in this manual under the
following conditions:
Danger
This symbol is used where there may be danger to personnel if the
instructions are disregarded or not followed accurately!
Warning
This symbol is used where there may be danger to equipment or data if the
instructions are disregarded or not followed accurately!
Warning
This symbol is used where special care is required when handling
components which are liable to damage from electrostatic discharge.
Note
This symbol is used when your attention is drawn to a special remark.
Reference
This sign refers to further information in other manuals, chapters or sections.
Footnote
Footnotes are notes which refer to certain points in the text. Footnotes
consist of two parts:
Marking in the text and the footnote text.
The markings in the text are arranged as continuous superscript numbers.
Action
This symbol shows that an action to be performed is described.
The individual steps are designated by the star, for example:
h
h Press the
key
E
h Confirm with
1 Introduction
9