Table of Contents
Advertisement
3.5.10 Print out channel numbers
3.5.11 Recording start and stop
H
In order to be able to associate measurements more clearly with a channel, the
channel number can be printed next to the trace, in the channel colour. The
print-out is made cyclically, at a configurable spacing (Configuration level 2
Print channel numbers).
Selectable spacings:
- 2cm
- 4cm
- 6cm
- print switched off
The start and stop of recording is registered by a configurable start and end
text (Configuration level 2
The text printing can be switched on or off independently for the start and end
texts. The print-out is made together with the time, and always in red.
Both texts will only be printed while the recording is enabled, i.e. the print of
the end text is always made "in arrears".
03.11.98 13.20 Recording start
03.11.98 12.34 Recording stop
The start text should always have the highest priority, to ensure
that it is always printed out at the start of recording.
3 Operation and visualisation
Start text, Configuration level 2
End text).
47
Advertisement
Table of Contents
