Table of Contents
Advertisement
10.3 External relay module ER8
H
A
The external relay module ER8 adds 8 switching outputs to the recorder.
The sequence of the relays 1 — 8 is permanently assigned to the limit compa-
rators 1 — 8 (limit state). The corresponding limit state is only transferred to
the relay if the relay has been activated (Configuration level 3
Status = ON).
v Section 3.1 "Limit monitoring by limit comparators"
v Section 3.5.4
"Limit comparator texts, external text, binary-linked external text"
v Section 4.2 "Table of the configuration parameters"
The external realy module ER8 can only be operated when the
Extra Code has been installed in the recorder.
When the setup connector is plugged into the recorder, all relays
are de-energised.
10 Extra codes and accessories
Relay output
93
Advertisement
Table of Contents
