Table of Contents
Advertisement
2 Instrument description
H
H
Configuration
level 1 (C1-level)
H
H
20
If the same figures are used for both code numbers, then these
code numbers will be interpreted as code numbers for the com-
plete parameter set.
The relays in the external relay module ER8 remain in their present
state. They will only be switchable again when the printing record-
er has been returned to the operating level or the basic status.
After a valid code number has been entered, the following parameters can be
altered in the parameter level:
- language
- date & time
- summer time
- display brightness
- display time
Channel-specific parameters can be configured in configuration level 1. This
level can be accessed from the parameter level with the aid of the h + R keys,
or from configuration level 2 by using e.
If a correct code number is entered when calling up the parameter
level, then the signal acquisition and recording will be interrupted
in this level. The parameters can be viewed and altered.
The relays of the external relay module ER8 remain in the present
state. They will only be switchable again when the printing record-
er has been returned to the operating level or the basic status.
Configuration level 1 includes the following channel-specific parameters:
- plot status
- signal input
- scaling
- channel name (word and number)
- limit comparator
- limit feed
- zoom
- presentation range (offset)
- peak value recording
Advertisement
Table of Contents
