Introduction; Preface - JUMO LOGOPRINT 500 Operating Manual

1.1

Preface

B
H
Please read this Operating Manual before commissioning the instrument.
Keep the operating manual in a place which is accessible to all users at all
times.
Please assist us to improve this manual, where necessary.
Your suggestions will be appreciated.
Phone in Germany
from abroad (+49) 661 6003-0
Fax in Germany
from abroad (+49) 661 6003-607
All the necessary settings are described in this manual. However, if
any problems should arise during start-up, you are asked not to
carry out any unauthorised manipulations. You could endanger
your rights under the warranty!
Please contact the nearest JUMO office or the head office.
E
When returning modules, assemblies or components, the
regulations of EN 61340-5-1 and EN 61340-5-2 "Protection of
electronic devices from electrostatic phenomena" must be
observed. Use only the appropriate ESD packaging for transport.
Please note that we cannot accept any liability for damage caused
by ESD.
ESD=electrostatic discharge
(0661) 6003-727
(0661) 6003-508

1 Introduction

7