僅 Electronic Parking Brake - Kia Stinger 2023 Owner's Manual

Driving your vehicle
Electronic Parking Brake
Applying the parking brake
To apply the EPB (electronic
parking brake):
OCK050017
1. Depress the brake pedal.
2. Pull up the EPB switch.
Make sure the warning light comes on.
Also, the EPB is applied automatically if
the Auto Hold button is on when the
engine is turned off. However, if you pull
up the EPB switch after the engine is
turned off, the EPB will not be applied.
NOTICE
On a steep incline or when pulling a
trailer, if the vehicle does not remain at a
standstill, do as follows:
1. Apply the EPB.
2. Pull up the EPB switch for more than 3
seconds.
Do not operate the EPB while the vehicle
is moving except in an emergency situa-
tion.
NOTICE
A click or electric brake motor whine
sound may be heard while operating or
releasing the EPB. These conditions are
normal and indicate that the EPB is func-
tioning properly.
Releasing the parking brake
To release the EPB (electronic
parking brake), press the EPB
switch while doing the following:
OCK050018N
僅 Have the ENGINE START/STOP but-
ton in the ON position.
僅 Depress the brake pedal.
僅 The shift lever must be in P (Park).
Make sure the brake warning light goes
off.
To release EPB (electronic park-
ing brake) automatically:
僅 Shift lever in P (Park)
With the engine running depress the
brake pedal and shift out of P (Park)
to R (Reverse) or D (Drive).
僅 Shift lever in N (Neutral)
With the engine running depress the
brake pedal and shift out of N (Neu-
tral) to R (Reverse) or D (Drive).
僅 Automatic Transmission
1. Close the driver's door, engine
hood and liftgate.
Brake system
5
5 37