Kia Stinger 2023 Owner's Manual page 474

Maintenance
The LED lamps cannot be replaced as a
single unit because it is an integrated
unit. The LED lamps has to be replaced
with the unit.
A skilled technician should check or
repair the stop and tail lamp (LED), for it
may damage related parts of the vehicle.
Back up lamp (bulb type) bulb
replacement
1. Open the tailgate.
2. Remove the service cover of both side
(drive side and passenger side).
OCK070057
3. Remove the nuts from rear combina-
tion lamp of both side (drive side and
passenger side).
4. Disconnect the connector from rear
combination lamp of both side (drive
side and passenger side).
5. Remove the rear combination lamp
assembly from the body of the vehi-
cle.
OCK070058
OCK070127
6. Remove the socket from the assembly
by turning the socket counterclock-
wise until the tabs on the socket align
with the slots on the assembly.
7. Remove the bulb from the socket by
pressing it in and rotating it counter-
clockwise until the tabs on the bulb
align with the slots in the socket. Pull
the bulb out of the socket.
Light bulbs
7
7 63