Kia Stinger 2023 Owner's Manual page 307

Driving your vehicle
or a bumper guard near the rear cor-
ner radar.
僅 The function may not work properly if
the bumper has been replaced, or the
surroundings of the rear corner radar
has been damaged or paint has been
applied.
僅 If a trailer, carrier, etc. is installed, it
may adversely affect the performance
of the rear corner radar or the func-
tion may not operate.
For more details on the precautions of
the front view camera, refer to "For-
ward Collision-Avoidance Assist (FCA)
(Sensor fusion)" on page 5-54.
Blind-Spot Collision-Avoidance
Assist settings
Setting
OCK052315L
Blind-Spot Safety
With the ENGINE START/STOP button in
the ON position, select 'Driver Assistance
→ Blind-Spot Safety' from the setting
menu to set whether or not to use each
function.
僅 If 'Active Assist' is selected, Blind-Spot
Collision Warning will warn the driver
with a warning message, an audible
warning and braking assist will be
5 76
Blind-Spot Collision-Avoidance Assist (BCA)
applied depending on the collision risk
levels.
僅 If 'Warning Only' is selected, the func-
tion will warn the driver with a warn-
ing message, an audible warning
depending on the collision risk levels.
Braking will not be assisted.
OCK050232L
When the engine is restarted with Blind-
Spot Collision Warning off, the 'Blind-
Spot Safety System is Off' message will
appear on the cluster.
If you change the setting from 'Off' to
'Active Assist' or 'Warning Only', the
warning light on the side view mirror
(outside mirror) will blink for approxi-
mately 3 seconds.
In addition, if the engine is turned on,
when the function is set to 'Active Assist'
or 'Warning Only', the warning light on
the side view mirror (outside mirror) will
blink for approximately 3 seconds.
WARNING
僅 If 'Warning Only' is selected, braking
is not assisted.
僅 If 'Off' is selected, the driver should
always be aware of the surroundings
and drive safely.