Kia Stinger 2023 Owner's Manual page 215

Features of your vehicle
tem senses the moisture of inside the
windshield and operates.
If more moisture is in the vehicle, higher
steps operate as follow.
(For European region)
Step 1: Outside air position
Step 2: Blowing air flow toward the wind-
shield
Step 3: Increasing air flow toward the
windshield
Step 4: Operating the air conditioning.
(For except european region)
Step 1: Operating the air conditioning.
Step 2: Outside air position
Step 3: Blowing air flow toward the wind-
shield
Step 4: Increasing air flow toward the
windshield
(Step could be changed according to the
out side temperature)
To cancel or reset the Auto
Defogging System
Press the front windshield defroster but-
ton for 3 seconds when the ENGINE
START/STOP button is in the ON posi-
tion.
When the ADS system is canceled, Indi-
cator on the button will blink 3 times per
0.5 sec and the position "ADS OFF" will
be displayed on the climate control
information screen.
When the ADS system is reset, Indicator
on the button will blink 6 times per 0.25
sec and the position "ADS OFF" will be
disappeared on the climate control infor-
mation screen.
You can set or release the Auto Defog-
ging System on the Climate Information
selection screen.
4 136
Windshield defrosting and defogging
If the battery is discharged or detached,
the auto defogging system will be reset.
Adjust the feature accordingly.
CAUTION
僅 Pressing one of Air intake recircula-
tion, A/C OFF, Wind Direction Mode
selection Buttons will deactivate the
Auto Defogging System. To secure a
driver's vision, never push air recircu-
lation, A/C OFF, Wind Direction But-
tons while the Auto Defogging System
is running.
僅 Do not forcibly remove the sensor
cover on the top of windshield glass
on the driver's side in the car. Remov-
ing the cover can damage the sensor.
Automatic ventilation
The system automatically selects the
outside (fresh) air position when the cli-
mate control system operates over a
certain period of time (approximately 30
minutes) in low temperature with the
recirculated air position selected.
To cancel or reset the Automatic
Ventilation
When the air conditioning system is on,
select Face Level
pressing the A/C button, press the recir-
culated air position button five times
within three seconds.
When release the automatic ventilation
function, the indicator will blink 3 times
at 0.5 second intervals and air direction,
air volume, Recirculation/Fresh mode,
and air conditioner is automatically con-
trolled.When it set the automatic ventila-
tion function, the indicator will blink 6
times at 0.25 seconds intervals and air
direction, air volume, Recirculation/
Fresh mode, and air conditioner is auto-
matically controlled.
mode and while