Kia Stinger 2023 Owner's Manual page 42

Safety features of your vehicle
Lap/shoulder belt
Height adjustment
ODEEV058027NR
You can adjust the height of the shoul-
der belt anchor to one of 4 positions for
maximum comfort and safety.
The height of the adjusting seat belt
should not be too close to your neck.
Otherwise, you will not be getting the
most effective protection. The shoulder
portion should be adjusted so that it lies
across your chest and midway over your
shoulder near the door and not your
neck.
To adjust the height of the seat belt
anchor, lower or raise the height
adjuster into an appropriate position.
To raise the height adjuster, pull it up (1).
To lower it, push it down (3) while press-
ing the height adjuster button (2).
Release the button to lock the anchor
into position. Try sliding the height
adjuster to make sure that it has locked
into position.
Improperly positioned seat belts can
cause serious injuries in an accident.
WARNING
Shoulder belt positioning
Never position the shoulder belt across
your neck or face.
WARNING
Seat belt replacement
Replace your seat belts after being in an
accident. Failure to replace seat belts
after an accident could leave you with
damaged seat belts that will not provide
protection in the event of another colli-
sion.
To fasten your seat belt:
ODEEV058025NR
To fasten your seat belt, pull it out of the
retractor and insert the metal tab (1) into
the buckle (2). There will be an audible
"click" when the tab locks into the
buckle.
The seat belt automatically adjusts to
the proper length only after the lap belt
portion is adjusted manually so that it
fits snugly around your hips. If you lean
forward in a slow, easy motion, the belt
will extend and let you move around. If
there is a sudden stop or impact, how-
ever, the belt will lock into position. It will
also lock if you try to lean forward too
quickly.
NOTICE
If you are not able to pull out the seat
belt from the retractor, firmly pull the
Seat belts
3
3 21