Kia Stinger 2023 Owner's Manual page 326

Driving your vehicle
Blind-Spot View Monitor opera-
tion
Controller
Turn signal switch
OCK040516N
僅 Blind-Spot View Monitor displays the
left or right side of the rear blind spot
area of your vehicle in the instrument
cluster when the left or right turn sig-
nal is on.
Blind-Spot View Monitor
Operating conditions
僅 Blind-Spot View Monitor is activated
when the following steps are per-
formed.
- Turn signal is ON
Off conditions
僅 Turn signal is OFF
僅 Hazard warning flasher is ON
僅 Other warnings pops up and takes
priority over Blind-Spot View Monitor
Blind-Spot View Monitor (BVM)
Blind-Spot View Monitor mal-
function and limitations
Blind-Spot View Monitor mal-
function
僅 When Blind-Spot View Monitor is not
working properly, or the cluster dis-
play flickers, or the camera image
does not display normally, have your
vehicle inspected by an authorized
Kia dealer.
WARNING
僅 A wide-angle lens is used for Blind-
Spot View Monitor. There may be a
difference between actual object dis-
tance and visual object distance due
to correction of the image distortion.
Pay attention to the road conditions
and surroundings at all times.
僅 If the camera lens is covered with for-
eign material, Blind-Spot View Moni-
tor may not operate normally. Always
keep the camera lens clean. However,
do not use chemical solvents such as
strong detergents containing high
alkaline or volatile organic solvents
(gasoline, acetone etc.). This may
damage the camera lens.
5
5 95