Kia Stinger 2023 Owner's Manual page 53

Safety features of your vehicle
NOTICE
The recommended maximum weight for
the LATCH system is 65 lbs. (30 kg).
When selecting a proper child restraint,
consider that the maximum total weight
of the child plus the child restraint
should be less than 65 lbs (30 kg).
As a guide, the MAX child restraint
weight should be determined by the fol-
lowing calculation:
Child Restraint Weight = 65 - (child's
total weight in lbs.)
Securing a child restraint seat
with "Tether Anchor" system
OCK030027N
First secure the child restraint with the
LATCH lower anchors or the seat belt. If
the child restraint manufacturer recom-
mends that the top tether strap be
attached, attach and tighten the top
tether strap to the top tether strap
anchor.
Child restraint hook holders are located
on the back of the rear seatbacks.
WARNING
Take the following precautions when
installing the tether strap:
3 32
Child Restraint System (CRS)
僅 Read and follow all installation
instructions provided with your child
restraint system.
僅 NEVER attach more than one child
restraint to a single tether anchor.
This could cause the anchor or attach-
ment to come loose or break.
僅 Do not attach the tether strap to any-
thing other than the correct tether
anchor. It may not work properly if
attached to something else.
僅 Do not use the tether anchors for
adult seat belts or harnesses, or for
attaching other items or equipment to
the vehicle.
僅 Always fasten the seat belts behind
the child restraint seat when they are
not used to secure the child seat. Fail-
ure to do so may result in child stran-
gulation.
OCK030028
To install the tether anchor:
1. Route the child restraint tether strap
over the child restraint seatback.
Route the tether strap under the head
restraint and between the head
restraint posts, or route the tether
strap over the top of the vehicle seat-
back. Make sure the strap is not
twisted.