Kia Stinger 2023 Owner's Manual page 456

Maintenance
appropriate circuit fuse. If a fuse has
blown, the element inside the fuse will
melt.
If the electrical system does not work,
first check the driver's side fuse panel.
Always replace a blown fuse with one of
the same rating.
If the replacement fuse blows, this indi-
cates an electrical problem. Avoid using
the system involved and immediately
consult an authorized Kia dealer.
Three kinds of fuses are used: blade
type for lower amperage rating, car-
tridge type, and multi fuse for higher
amperage ratings.
WARNING
Fuse replacement
僅 Never replace a fuse with anything
but another fuse of the same rating.
僅 A higher capacity fuse could cause
damage and possibly a fire.
僅 Never install a wire or aluminum foil
instead of the proper fuse - even as a
temporary repair. It may cause exten-
sive wiring damage and a possible
fire.
僅 Do not arbitrarily modify or add-on
electric wiring to the vehicle.
CAUTION
Do not use a screwdriver or any other
metal object to remove fuses because it
may cause a short circuit and damage
the system.
NOTICE
僅 When replacing fuse, turn the ignition
"OFF" and turn off switches of all elec-
trical devices then remove battery (-)
terminal.
僅 The actual fuse/relay panel label may
differ from equipped items.
WARNING
Electrical Fire
Always ensure replacements fuses and
relays are securely fastened when
installed. Failure to do so can result in a
vehicle fire.
CAUTION
僅 When replacing a blown fuse or relay,
make sure the new fuse or relay fits
tightly into the clips. Failure to tightly
install the fuse or relay may cause
damage to the wiring and electric sys-
tems.
僅 Do not remove fuses, relays and ter-
minals fastened with bolts or nuts.The
fuses, relays and terminals may not
be fastened correctly which may
cause vehicle damage.
CAUTION
僅 Do not input any other objects except
fuses or relays into fuse/relay termi-
nals such as a driver or wiring. It may
cause contact failure and system mal-
function.
僅 Do not plug in screwdrivers or after-
market wiring into the terminal origi-
nally designed for fuse and relays
only. The electrical system and wiring
of the vehicle interior may be dam-
aged or burned due to contact failure.
僅 If you directly connect the wire on the
taillight or replace the bulb which is
over the regulated capacity to install
trailers etc., the inner junction block
can get burned.
Fuses
7
7 45