Chapter 11
11.4.1
Kinetic Timing Modes and Shutter Control
Kinetics mode operates with three timing modes:
•
•
•
Figure 11-12
Figure 11-12:Typical WinX Hardware Setup Dialog
Advanced Topics
Free Run {No Response};
This mode is used for experiments that do not required any experiment
synchronization.
Single Trigger {Readout Per Trigger};
This mode requires an external TTL pulse be applied to the camera via the EXT
SYNC connector on the rear of the PIXIS. See
Multiple Trigger {Shift Per Trigger}.
This mode requires an external TTL pulse be applied to the camera via the EXT
SYNC connector on the rear of the PIXIS. See
and
Figure 11-13
illustrate the configuration dialogs for WinX.
Figure
11-8.
Figure
11-8.
95