Cables; Certificate Of Performance; Pixis System User Manuals; Table 2-2: Standard Pixis Camera System Cables - Teledyne PIXIS Manual

22
2.2

Cables

Table 2-2

Table 2-2: Standard PIXIS Camera System Cables

Cable
USB 2.0
MCX to BNC
2.3

Certificate of Performance

Each PIXIS camera is shipped with a Certificate of Performance which states that the
camera system has been assembled and tested according to approved Teledyne
Princeton Instruments procedures. It documents the camera's performance data as
measured during the testing of the PIXIS and lists the following camera- and
customer-specific information:
•
•
•
This information is useful when contacting Teledyne Princeton Instruments Customer
Support.
2.4

PIXIS System User Manuals

The PIXIS System User Manual describes how to install, configure, and use a PIXIS
camera and its components.
PIXIS System Manual
describes the cables included with a standard PIXIS Camera System.
Part
Number
6050-0494
6050-0540
Sales Order Number;
Purchase Order Number;
Camera Serial Numbers
Description/Purpose
Connects the USB 2.0 connector on the rear of
the PIXIS with a USB card installed in the host
computer.
Two MCX to BNC adapter cables are included.
These connect to the EXT SYNC and the LOGIC
OUT connectors on the rear of the PIXIS
Issue 5
Length
5 m
[16.4 ft]
4411-0106_0005
Varies
4411-0106_0006