Table of Contents
Advertisement
7.3
Electrical connection
The FG10I DGT, FG10I DGT CHILL&CW refrigerator is equipped with a IEC connection socket and a
main power switch on the back panel.
The power cord with Schuko plug (CEE 7/7) is supplied with the refrigerator.
Before connecting the refrigerator to the main electrical line, make sure that the supply has the
same characteristics (voltage, number of phases, network frequency and amperage) as those
EN
stated on the product label.
Grounding the appliance is obligatory and therefore you must ensure that the electrical system to
which the refrigerator will be connected is grounded and that the grounding system is in perfect
working order.
The manufacturer declines all liability for any damage suffered by people or property as a result of
failure to abide by the above instructions.
To connect the refrigerator to the main electrical line, insert the plug into a socket without using, if
possible, adaptors, multiple sockets and/or extension cords.
Should the use of any of these
accessories be unavoidable, only use items that comply with current safety standards and take
care never to exceed their capacity (in current).
IEC
connection
socket
ON/OFF
switch
22
Advertisement
Table of Contents
