Table of Contents
Advertisement
7.2
Positioning
The refrigerator has the overall dimensions in millimetres (in inches) shown in the figure below.
EN
Place the refrigerator on a horizontal surface and use the adjustable feet to level it, if needed.
When choosing the position of the refrigerator, remember that a gap of at least 50 mm (2 in.) is
required between the back panel of the refrigerator and any wall in order to allow the warm air
from condensation to escape.
As far as any space requirements at the sides of the refrigerator are concerned, there are no
specific instructions.
21
Advertisement
Table of Contents
