Ip Routing Setup - Multitech MTASR3-200 Quick Start Manual

RASFinder MTASR3-200 Quick Start Guide

IP Routing Setup

14. For IP Routing, after you have enter your unique LAN address,
and the WAN Remote Addresses have to be in the same
network as the IP Address.
In the IP group, change the default LAN IP Address that is
assigned to your RASFinder's LAN port. As you click OK,
sequential addresses will appear in the Remote address fields
for WAN1, 2, and 3. [See above, where the Ethernet IP Ad-
dress was entered as 192.168.2.112, and the software applied
14