Multitech MTASR3-200 Quick Start Manual page 27

administrator. The shared Secret must be the same secret
that is used on the Radius server whose address is being
supplied for the Radius primary server address entry.
10. Obtain the Radius server address from the Radius
network administrator that will provide the security to the
RASFinder. The Radius server address is to be entered in
the Radius Primary Server Address field.
11. If additional servers are being used as backup servers,
obtain their address(es) from the Radius network
administrator and enter them in Backup Server group.
Enter the address of the first backup server in the Backup
Server Address 1 field. Enter the addresses of any
additional backup servers in the Backup Server Address
2 and Backup Server Address 3 fields.
12. A set of default attribute values will be displayed in the
Attribute Values group. These default values are used
with the Multi-Tech Radius Server. You do not have to
change these values if your RASFinder is communicating
with Multi-Tech's Radius Server. However, if you are using
another vendor's Radius Server to communicate with your
RASFinder, you will have to check with your Radius
Server network administrator to see how these attribute
values are set up, then change the default values to the
values used by that Radius server.
Radius
27