Table of Contents
Advertisement
9. The Add/Edit Filters dialog box is displayed.
10. Build your filtering parameters by filling in the following fields
for each remote user.
ID
This field requires a unique ID identifying the remote user.
The ID can be the name of a person, a work station, or a
remote user identified simply as "User 1". The ID can be
up to 9 alphanumeric characters in length.
Default Action
This drop-down list enables you to select either filter or
forward. If you select filter, then the entry will be transmitted
with filtering properties. If you select forward, then the entry will
be transmitted without filtering properties. The default setting is
filter.
Filter Type
The Filter Type drop-down list enables you to select the filter
type. The filter types are either IP Address, Protocol, or Do-
main Name. The default setting for Filter Type is IP Address.
IP Address - If the filter type is IP Address, enter the IP
Remote User Data Base
23
Advertisement
Table of Contents
Need help?
Do you have a question about the MTASR3-200 and is the answer not in the manual?
Questions and answers