Network Setup; Network Setup > Ip Settings - Multitech MultiModem iSMS SF 100-G User Manual For System Administrators

Network Setup > IP Settings

Network Setup

Network Setup > IP Settings
Use this screen to set up your network.
IP Settings – LAN
The MultiModem iSMS needs to be programmed with a static IP address. The MultiModem iSMS does not
support DHCP assigned IP addresses.
IP Address
Enter the IP Address of the LAN Interface. The factory default is 192.168.2.1.
Subnet Mask
Enter the Subnet Mask for the IP address configured. The factory default is 255.255.255.0.
Default Gateway
Enter the Default Gateway. The factory default is 192.168.2.2.
Primary DNS and Secondary DNS
Enter the address of the primary and secondary DNS (domain name system) IP Address. The order in
which domain names are entered is the order in which they are consulted.
IMPORTANT Note About Valid Gateway and DNS Addresses
For e-mail notifications and SNTP Time/Date accuracy, you must have a live Ethernet connection, and
this requires a valid gateway address and at least one DNS address.
Save
Click the Save button.
Multi-Tech Systems, Inc.
Downloaded from Elcodis.com electronic components distributor
MultiModem® iSMS User Guide for Administrators
Chapter 4 – Using the Web Interface
36