Table of Contents
Advertisement
Installing Your RASFinder Software
The RASFinder software is set up to default to a Remote Access
Server (RAS) application. Within the RAS application, you can
configure the RASFinder to communicate with either a Radius
Server for centralized network security or a proprietary Remote
User Data base utility to establish your remote user profiles. You
can also configure the RASFinder as a router for LAN-to-LAN
routing.
The RASFinder CD-ROM contains your RASFinder software, this
Quick Start, and the User Guide. The RASFinder CD-ROM is auto-
detectable, and should start automatically when inserted into your
CD-ROM drive. After configuring your RASFinder, you can view
the User Guide by clicking the View Manuals icon and selecting
either the Quick Start or User Guide.
1. Insert the RASFinder CD-ROM into the CD-ROM drive on your
local PC. The CD-ROM should start automatically; however, it
may take 10 to 20 seconds for the RASFinder screen to
appear.
If the RASFinder Splash screen does not appear automatical-
ly, click My Computer, right-click the CD-ROM drive icon, then
click (Autorun or AutoPlay).
Software
9
Advertisement
Table of Contents
