IP Wizard Setup
The IP Wizard Setup dialog box guides you through the process of assigning LAN and WAN IP ports
address information and provides an option to use the ProxyServer's built-in DHCP Server if your
LAN is not already running a DHCP Server which automatically assigns client IP addresses. If you
choose to enable the built-in DHCP Server, you are given the option of also enabling the Domain
Name Server.
11. Follow on-screen instructions to configure the IP Ports, DHCP Server, and Domain Name Server.
Note: If you plan to use the ProxyServer's DHCP server, disable any other DHCP server
operating on the local/private LAN to prevent clients from receiving IP addresses from two
independent sources.
If necessary, obtain Primary and Secondary DNS IP addresses from the DNS tab under Network/
Protocol (or TCP/IP)/Properties or from your ISP.
Highlight the WAN option in the Select Port window to display WAN setup information.
12. The IP Wizard Setup dialog box displays the WAN setup information.
Follow the on-screen instructions to configure the WAN port. If you want the WAN port configured
for Remote Access, click the Remote Access to be enabled? check box and then enter the
remote IP address in the Remote Address field.
Click OK when you are satisifed with the IP Wizard Setup.
MTPSR1-202ST
Chapter 3 - Software Loading and Configuration
21