List Of Operating Parameters - HEIDENHAIN ND 281B User Manual

List of Operating Parameters

Parameter Settings / Function
Enter a code number:
P00 CODE
9 51 48:
41 52 63: To select the linear or angular
10 52 96: Multipoint axis error
24 65 84: To lock the keyboard
66 55 44: To show the software version
24 65 82: Distance-to-go display
48 61 53: Input and output of parameter
Units of measurement
P01
Display in millimeters
Display in inches
Select an encoder input
P02 X1/X2
Signals at X1
Signals at X2
Display mode
P08 DISPL.
Decimal degrees
Deg., minutes, seconds
24
To change the protected
operating parameters
measurement mode
compensation
and compensation-value lists
1)
11 µAPP
1 VPP
2)
DEC. DEGREE
DEG.MIN.SEC.
Parameter Settings / Function
Angle display
P09 ANGLE
+/- 180°
+/-
360°
Scaling factor
P11 SCL
Scaling factor off
Scaling factor on
Scaling factor
P12 SCL
Enter a numerical value
0.100000 < P12 < 9.999999
Default setting: 1.000000
MM
Sorting and tolerance checking
P17 CLASS
Sorting and tol. checking ON
INCH
Sorting and tol. checking OFF
Lower limit for sorting
P18 L.CLASS
Upper limit for sorting
P19 U.CLASS
Display for series of measurements
P21 SERIES
OFF
1) Only in linear measurement mode.
2)
Only in angular measurement mode.
2)
+/- 180 DEG.
¥
1)
SCALING OFF
SCALNG. ON
1)
MIN MAX ACTL
ENDLESS
360 DEG.
CLASS ON
CLASS OFF
1)
DIFF