Table of Contents
Advertisement
Code number for changing protected operating
parameters
If you wish to change protected operating parameters, you
must first enter the code number 9 51 48:
ä
Select the user parameter P00 CODE.
ä
Enter the code number 9 51 48.
ä
Confirm entry with ENT.
Parameter P30 appears on the display. By paging through the
list of operating parameters you can display—and, if
necessary, change—each protected operating parameter and,
of course, each user parameter.
Once you have entered the code number, the
protected operating parameters remain accessible
until the display unit is switched off.
Functions for changing the operating parameters
Function
Page forward
in the list of operating parameters
Page backward
in the list of operating parameters
Reduce parameter value
Increase parameter value
Correct entry and
display parameter designations
Confirm change or numerical entry,
exit the list of operating parameters
A changed parameter is stored as soon as you
•
Exit the list of operating parameters
or
•
Page forward or backward after the change.
Key
MOD
23
Advertisement
Table of Contents
