Fitting A Laminating Film; Figure 21 Take Out The Film Cartridge; Figure 22 Loading The Laminating Film; Figure 23 Installing The Film Cartridge - idp SMART Series User Manual

2.3. Fitting a laminating film

In case of installation of the laminator, please fit a laminating film as below.
(1) Open the laminator cover by
pressing the laminator cover open
button. Take out the film cartridge.
(Caution: Laminator head is possible to
be HOT. Do not touch it.)

Figure 21 Take out the film cartridge

(2) Insert the laminating film in the same
way of ribbon.
(Caution! If the film is not tightened, a
rolling up error might be happened.)

Figure 22 Loading the laminating film

(3) Install the film cartridge into the
laminator and close the laminator cover.

Figure 23 Installing the film cartridge

22