Table of Contents
Advertisement
ProxyServer User Guide
WAN Link(s) Setup
The Default WAN Link(s) Setup dialog box guides you through bonding the WAN ports together
(MLPPP), entering the phone number of the ISP, and entering your user name and password
negotiated with ISP for Internet access.
13. Determine if MultiLink PPP (MLPPP) is going to be enabled; i.e., all three WAN links bonded
together.
Note: When MLPPP is used, the Dial Number, User Name, and Password have to be the same
for all three WAN ports.
14. Click Dial Number for WAN 1 and enter the phone number supplied by your ISP for WAN 1. The
phone number can be a standard local number or it can include a long distance prefix.
15. Click the User Name for WAN 1 and enter your user name that you negotiated with your ISP for
WAN 1. The User Name can be up to 40 alphanumeric characters. The User Name is not case
sensitive.
16. Click the Password for WAN 1 and enter your password that you negotiated with your ISP for
WAN 1. The password can be up to 15 alphanumeric characters and may or may not be case
sensitive depending on your ISP.
17. Repeat the above three steps for WAN 2.
18. Repeat the above three steps for WAN 3.
19. Click the OK button to continue installing the software.
20. The Checking ProxyServer dialog box is displayed.
Click OK to proceed.
20
MTPSR3-200
Advertisement
Table of Contents
