Table of Contents
Advertisement
ProxyServer User Guide
The Static Routes Setup dialog box is displayed. Select and key in the appropriate information for
setting up the static route.
Port is the type of port, usually LAN (If you have a modem connected to one of the WAN ports and
are using it for RAS, you could set up a static route to route incoming traffic to a different network) .
The IP Address must be the address of the target host or network in the static route (In our example,
Static Route IP Address 200.1.1.0 indicates that PC clients on Routers with IP addresses beginning
with 200.1.1 will be included on the static route). The Address Mask is the IP subnetwork mask
(255.255.255.0) of the target host. The Gateway Address must be the IP address of the local router
(Gateway Address 192.168.2.1) on the next hop toward the target host and the port (i.e., LAN) with
which it is associated. Metric is the hop count (1) to the target host.
Once you have completed entering all the appropriate information, click OK. The static route is
entered in the Static Routes table.
30
MTPSR3-200
Advertisement
Table of Contents
