Table of Contents
Advertisement
Running Diagnostics
The ProxyServer Setup program lets you perform various hardware tests on the LAN and WAN links.
The Diagnostics dialog box is displayed by clicking the Built in Test button in the ProxyServer
Setup dialog box.
Diagnostic tests are performed if the Communication type of the Local Port configuration is set to
COM Port. If the Local Port configuration is set for IP, no diagnostic tests are performed by the
ProxyServer.
Note: Test will FAIL unless loopback plugs are used on the port you are testing.
MTPSR3-200
Chapter 4 - ProxyServer Software
49
Advertisement
Table of Contents
