Table of Contents
Advertisement
5. The Choose Destination Location dialog box is displayed. Follow the on-screen instructions to
install your ProxyServer software.
You can either choose the Destination Location of your ProxyServer software or select the
default destination by clicking Next>. If you click Browse, you can select a different destination
folder for your ProxyServer software; however, it is recommended that you accept the default
folder, C:\Proxy.210.
6. The Select Program Folder dialog box enables you to name the Program Folder for the
ProxyServer files. You can select the default name, ProxyServer 2.10, or name it anything you
like.
When finished, click Next> to continue.
7. The ProxyServer Setup dialog box asks if you are configuring your ProxyServer through the
COM port of your PC or over the LAN (IP).
If you are configuring the ProxyServer over your network, click OK to continue.
If you need to configure your ProxyServer through the Command port, follow the instructions in
the dialog box for selecting the COM Port, then click OK to continue.
MTPSR3-200
Chapter 3 - Software Loading and Configuration
17
Advertisement
Table of Contents
