Chapter 4 - ProxyServer Software
Once MLPPP is enabled, you need to configure the individual WAN ports. The WAN 1, WAN 2 and
WAN 3 tabs allow you to configure the individual ports for separate use (i.e., non-MLPPP) or in
bonded use, as with MLPPP. Select each tab, and enter the identical User Name, Password, and
Dial Number for each port.
Once this is done, click OK and you will be returned to the Proxy Setup dialog box.
Enabling MLPPP also affects the WAN Setup dialog. If you click the WAN button, you will notice that
the Port Type group has been set to Dial Out Only and Proxy Enable.
The rest of the Port Type options are inactive (grayed-out). When MLPPP is disabled, all the Port
Type options become active again.
MTPSR3-200
37