Multitech MT5634HD16 User Manual page 58

MT5634HD8/16 User Guide
Command
&Mn
Nn
\Nn
On
P
Qn
&Qn
\Qn
52
Values Description
n = 0 Communications Mode
*** &M0
n = 0 or 1 Modulation Handshake
N0
*** N1
n = 0, 1, 2, 3, Error Correction Mode Selection.
4, 5, or 7 \N0
\N1
\N2
*** \N3
\N4
\N5
\N6
n = 0, 1, or 3 Go Back On Line
O0
O1
O3
In dialing Pulse-Dial
command Modem pulse-dials numbers that follow P.
n = 0 or 1 Result Codes Enable/Disable
*** Q0 Result codes sent.
Q1 Result codes suppressed (quiet).
n = 0, 5, or 6 Asynchronous Communications Mode
&Q0 Asynchronous with data buffering. Same as
\N0.
*** &Q5 Error control with data buffering. Same as \N3.
&Q6
n = 0, 1, or 3 Local Flow Control Selection
\Q0 Disable flow control. Same as &K0.
\Q1 XON/XOFF software flow control. Same as
&K4.
*** \Q3 RTS/CTS hardware flow control. Same as &K3.
Asynchronous mode.
Modem performs handshake only at
communication standard specified by S37 and
the B command.
Modem begins handshake at communication
standard specified by S37 and the B
command, but can fallback to a lower speed
during handshake.
Non-error correction mode with data buffering
(same as &Q6).
Direct mode.
MNP reliable mode.
V.42\MNP auto-reliable mode.
V.42 reliable mode.
V.42, MNP, or non-error correction. Same as
\N3.
V.42, MNP, or non-error correction. Same as
\N3.
Exit online command mode and return to data
mode.
Issue a retrain and return to online data mode.
Issue a rate renegotiation and return to data
mode.
Asynchronous with data buffering. Same as
\N0.
CommPlete Communications Server