MT5634HD8/16 User Guide
7. Tighten the MT5634HD8/16's retaining screws.
8. Repeat steps 1 through 7 for each of the MT5634HD8/16's you are installing. Three MT5634HD8's
9. Turn on power to the RASCard segment.
10. Check the LED indicators on the RASCard and the controllers. If the LEDs on the controller do not
Note: A self-test runs each time the CommPlete Communications Server is turned on. Refer to your
system Owner's Manual for more details on the power-on self-test.
10
must be installed for each T1 segment, three MT5634HD16's must be installed for each Dual T1
segment, and one MT5634HD16 and one MT5634HD8 must be installed for each PRI segment.
light, turn off the RASCard segment. Reseat the cards by repeating steps 5 through 9. If you continue
to experience problems, consult your CommPlete Owner's Manual for troubleshooting tips.
CommPlete Communications Server