Multitech MT5634HD16 User Manual page 26

MT5634HD8/16 User Guide
connection is made with error correction or compression enabled. These responses are called result codes ,
and they can be terse (numbers) or verbose (text).
En Echo Command Mode Characters
n = 0 or 1
Default: E1
Normally, when you type commands on the keyboard, the modem echoes the characters back to the
computer or terminal, which displays them on the monitor. Use the E command to turn this feature off
and on.
E0 disables the echo.
E1 enables the echo.
Qn Result Codes Enable/Disable
n = 0 or 1
Default: Q0
You can use the Q command to enable or disable result codes for applications such as computer-controlled
auto dialing.
Q0 (or Q) enables result codes.
Q1 disables result codes for applications such as computer-controlled auto-dialing.
Vn Result Codes (Verbose/Terse)
n = 0 or 1
Default: V1
The V command controls whether the modem's result codes display as text ("verbose") or numeric
("terse") messages. For example, if no carrier signal is detected after dialing, the result can be displayed
either as NO CARRIER , or as the number 3 .
V0 (or V) displays the modem's result codes as a number.
V1 displays result codes as text.
20 CommPlete Communications Server