Running The Winmcsi Workstation Software - Multitech MA6 Quick Start Manual

Running the WINMCSI Workstation Software

To log on to the communications server from a workstation
MA6
·
If you want the first available line, click Map, then click Close, and go to
the next section.
·
If you want a specific line, select a COM port in the Local Port list, then
select the line to which you want to map the COM port. The status
message
Note: If a serial mouse is connected to COM1, you must select a different local port.
·
Click Unmap if you want to unmap a line.
·
Click Search to search for lines on a server.
·
Click Close when finished.
should appear above the Local Port list.
61