Multitech MA6 Quick Start Manual page 26

Step Procedure
3 Remove the chassis mounting screw from the card cage. See Figure 4-4.
4 Finish pulling the card cage (including fan enclosure) straight up and out of the
chassis. See Figure 4-5. Set next to chassis.
Before placing card cage back into chassis, verify that power connectors from the power
26
Fig. 4-3. Cover Mounting Screws
Table 4.2 Card Cage Removal Procedure (cont'd.)
Fig. 4-4. Chassis Mounting Screw
Note
supply to backplane are fully attached
•
[( )]
MA6