Table of Contents
Advertisement
COMS14 -L [ServerName]
Type coms14 -L for a list of available communications servers.
Type coms14 -L [ServerName], e.g., coms14 -L server_1, for a list of services at an
individual server similar to that shown below:
List of services at the server SERVER_1
COMS14 -C COMn LineType SpecificName GeneralName ServerName
LineType
SpecificName
GeneralName
ServerName
COMS14 -D COMn
Port is disconnected.
58
: coms14 -m
(to list mapping of local COM ports to Network
ports)
GENERAL NAME
SPECIFICNAME
MODEM
Identifies whether the session will be inbound or outbound. The
LineType position must be filled by inbound, outbound, or an asterisk.
The latter indicates that the line type last selected by the user is to be
used.
Identifies the specific name assigned to the port on the RASExpress
server. This position must contain either the specific name assigned to
the RASExpress port (the default specific name for port one is
B1_LINE1) or it must contain an asterisk, which indicates that the first
available specific name is to be used. The specific name is used when
a specific modem is to be used on a communications server.
Identifies the general name assigned to the port on the RASExpress
server. This position must contain either the general name assigned to
the RASExpress port (e.g., MODEM) or it must contain an asterisk. The
latter indicates that the first available specific name is to be used. The
general name is used when more than one style of modem is used on a
communications server, e.g., an MT2834BA and an MT2834ZDX.
Identifies the server name assigned to the RASExpress server. This
position must contain either the server name (e.g., SERVER_1), or it
must contain an asterisk. The latter indicates that the first available
server is to be used. The server name is used when more than one
RASExpress server is on a network.
STATUS
LINE1
FREE
MA6
Advertisement
Table of Contents
