Vehicle Status - Aston Martin Vantage S 2016 Owner's Manual

Device Pairing
Use this procedure when pairing the first mobile phone to the
infotainment system.
Press PHONE and select ADD A NEW HANDSET. Press BACK to
cancel. Press ENTER.
The infotainment system will ask if Bluetooth® wireless technology is
in discoverable mode (refer to the mobile phone manufacturer's
instructions). If yes, press ENTER.
Follow the mobile phone manufacturer's instructions to search and
connect to a new Bluetooth® wireless technology device. The phone
will search for discoverable Bluetooth® wireless technology devices
in its range.
Select Vantage S from the device list.
If Vantage S does not show then check that the infotainment
system is ON and search again
Follow the instructions shown on the phone and the display to pair
the phone.
Once synchronising has completed the mobile phone is ready for use
with the vehicle audio and hands-free system. The vehicle will also
request access to call history and messages.
1
To add more devices when a device is already connected, press
PHONE and then navigate to BT Devices to open the device
manager. Select ADD A NEW HANDSET and follow the above steps
to add an additional device.
Dependant on phone model and software.
1.

Vehicle Status

Warning: Failure to avoid potentially hazardous situations
could result in an accident or collision resulting in death or
serious injury.
Warning: The vehicle status screens are intended for track
only. It is the driver's responsibility to use these features in a
responsible manner. Always use your best judgement, and
operate the vehicle in a safe manner. Minimise the amount of
time spent viewing the screen while driving and always be fully
aware of all driving conditions.
Warning: Do not allow yourself to become distracted and
minimise the amount of time spent viewing the screen while
driving and always be fully aware of all driving conditions.
Display Units
To change the units shown on the vehicle status screens (Refer to
'Display Units', page 4.16).
6.5