By default, the Home Mode is set to disarm the entire system, and the Away Mode is set to arm the entire system. The actions associated with these modes can

be changed from the Macros page. To change these actions, Edit the

have the system turn on the lamp in the living room and arm the system when in Away Mode.

After inserting an activated access key into the panel, the status LED should turn GREEN and the Home and Away button will become enabled. Press the button

corresponding to the mode you wish to activate. The button will begin to blink, and, upon completing the mode's associated actions, the Wireless Keypad will

beep twice. The buttons will then become disabled, and the Wireless Keypad will be waiting for the next key insertion.

Event Notification

The system can send a notification to your email or cell phone when the Home or Away button is activated on the access panel. Along with the date and time, the

notification will include the name of key used. This may be helpful, for example, to alert you when your child has come home from school. Please consult the Event

Scheduling section for more information on setting up notifications.

LED DESCRIPTIONS

DATA

• Green: Wireless Keypad is powered and communicating with the controller

• Red: There was a problem communicating with the controller

• Unlit: The Wireless Keypad is in sleep mode (battery operation only)

Home or Away macros

and modify the associated actions. For example, you may want to

Motorola homesight™ USER GUIDE

Table of Contents