Installing Software And Hardware - Motorola HMEZ2000 User Manual

Installation
IMPORTANT: Do not connect your Wireless System Controller to your computer until the installation wizard prompts you.
To install your homesight System:
1
Use the installation software on the installation CD-ROM (included) to guide you through installing the homesight program on your computer and discovering your hardware.
2
Configure the software and attach the Wireless System Controller guided by the set up wizard.
3
If desired, install additional cameras and/or sensors. You can also install additional devices later using the homesight program. See "Discover New Devices" for further
details.

Installing Software and Hardware

1
Before connecting the Wireless System Controller to your computer, place the homesight CD-ROM in your computer's CD-ROM drive. The setup wizard starts automatically.
Accept the License Agreement to continue.
2
Select Install Required Software.
3
When the introductory Installation window is displayed, click Next.
4
From the Choose Destination Location window, either accept the default destination or select a new one by clicking Browse. Once satisfied with the destination, click Next.
1
If the Windows installation wizard does not start automatically, do the following: Click Start, then Run. Click Browse and locate your CD-ROM drive. Locate Launch.exe and
highlight it. Click Open, then OK. The installation wizard will start.
2 Motorola homesight™ USER GUIDE
1